Previous

7/16 DIN F RA CLAMP for 1/4 Feeder Cable

270.00
Next

7/16 DIN F CLAMP for 1/4 Feeder Cable

202.50
Placeholder

7/16 DIN F CLAMP for 1/4 Super Flexible Cable

202.50

7/16 DIN F CLAMP for 1/4 Super Flexible Cable

202.50

A rugged 50 Ohm 7/16 DIN Female (Jack) Connector specifically engineered for 1/4″ superflexible coaxial cables. Featuring a non-solder clamp design and a tri-alloy plated brass body, it delivers an exceptional impedance match with a typical VSWR of ≤ 1.10:1 up to 3 GHz. This connector is essential for high-density jumpers and antenna connections where signal purity and weatherproof reliability are critical.

Title Range Discount
Buy more, save more! 10 - 50 192.38
Buy more, save more! 51 - 100 186.30
Buy more, save more! 101 - 150 182.25
Buy more, save more! 151 - 201 172.13
Add to Wishlist
Add to Wishlist
Description

Description

 This connector is tailored to the specific geometry of 1/4″ helical corrugated cables. The clamp mechanism compresses the outer conductor to create a 360-degree contact that is more durable than standard crimp methods. This high-pressure contact is the key to achieving ultra-low Passive Intermodulation (PIM), typically rated at ≤ -155 dBc, which prevents interference in sensitive modern networks.

Internally, it utilizes PTFE (Teflon) insulation and silver-plated phosphor bronze contacts for maximum conductivity and minimal signal loss. The 7/16 DIN interface is chosen for its large surface area and high torque capacity, ensuring that jumpers remain securely mated even in high-vibration tower-top or street-level environments. Integrated silicone gaskets provide an IP68 waterproof rating for long-term outdoor reliability.

Key Technical Advantages

  • Helical-Corrugation Optimized: The clamp assembly is designed to grip the spiral ridges of superflexible cable, preventing the connector from pulling off or rotating during installation.

  • Low PIM Engineering: Manufactured with non-magnetic materials to ensure minimal signal distortion, vital for high-speed data transmission in 5G infrastructure.

  • Field-Installable Clamp: Allows for faster, more reliable assembly in the field using standard wrenches, without the need for specialized soldering or hydraulic crimping equipment.

  • Weatherproof Reliability: Rated for IP68 protection, ensuring a reliable seal against rain, ice, and dust in exposed outdoor locations.

  • Corrosion Resistance: Features a tri-alloy (White Bronze) finish that resists oxidation and maintains low contact resistance over hundreds of mating cycles.

Key Features

  • Cable Compatibility: 1/4″ Super Flexible Coax (FSJ1-50, SCF14-50, LDF1-50).

  • Impedance: 50 Ohm.

  • Frequency Range: DC to 3 GHz (Typical); high-performance versions up to 7.5 GHz.

  • Connector Type: 7/16 DIN Female (Jack/Socket).

  • Body Plating: Tri-Alloy (White Bronze) or Silver.

  • Ingress Protection: IP68 (Mated).

Technical Summary

Parameter Specification (Typical 1/4″ SF Clamp)
Impedance 50 Ohm
PIM (3rd Order) ≤ -155 dBc @ 2 x 20W
VSWR ≤ 1.10:1 (up to 3 GHz)
Insertion Loss ≤ 0.1 dB
Inner Contact Silver-Plated Phosphor Bronze
Operating Temp -55°C to +125°C
Additional information

Additional information

Frequency Range

DC-7.5 GHz

Impedance

50Ω

Dielectric voltage

2.7 kV rms

Insulation resistance

= 5000 MO

Contact resistance

Inner Contact: =0.4 mO; Outer Contact: =1.5 mO

RF leakage

= 120 dB

Durability (matings)

M29x1.5 threaded coupling

Body and Outer Contacts

Brass, Silver & white bronze plated

Compliance

ROHS

Operating Temperature(?)

-45?C to +146

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “7/16 DIN F CLAMP for 1/4 Super Flexible Cable”

Your email address will not be published. Required fields are marked *

Recently Viewed Products

AetherX.in

Lorem ipsum dolor sit amet, consectetur adipiscing elit.consectetur adipiscing elit.

Share On:

Facebook
LinkedIn
© Eciton. All Rights Reserved.

Shopping cart

0
image/svg+xml

No products in the cart.

Continue Shopping